Loading... Please wait...

Geissele Hi-Speed National Match - Designated Marksman Rifle (DMR) Trigger

  • Image 1
Calculated at checkout

Product Description

Featuring a HI-SPEED hammer with 50% lock time reduction over standard hammers, this two stage trigger is adjustable for overtravel and sear engagement. 1st stage pull weights range from 1.3-3 lbs, 2nd stage pull weights range from .5-1.5 lbs. Includes instructions. Minor fitting may be required.

Technical Information

  • Note: When installing this trigger in an LR-308 the machined in trigger guard can sometimes hit the trigger so the bottom of the trigger may need to be relieved.
    Material: Steel

  • Trigger is adjustable for overtravel and sear engagement
  • HI-SPEED hammer
  • 50% lock time reduction over standard hammer
  • Gunsmithing is recommended by the manufacturer, safety clearance is the only known fitting required less than 5% of the time
  • Instructions included
  • Will not fit HK416/417
  • Pull Weights: 1st stage 1.3-3lb and 2nd stage 0.5-1.5lb

    A note on trigger and hammer pins:
  • Our good friends in Hartford have made one more deviation from the norm in some of their AR type rifles, using an approximately .170" (large) hole for the hammer and trigger pins as opposed to the .154" (small)diameter pins of the rest of the world, including all military M16s. This change was made in order to make it more difficult for civilians to use M16 parts in AR rifles. This is important to note, and before purchasing any hammer, trigger, disconnector or lower parts kit you need to check the diameter of the holes in your lower to determine if you have a "large" or "small" pin lower receiver.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Other Information

Contact Us:

1000 Riverwalk Terrace 1st Floor
Jenks, OK. 74037
Fax your FFL info to: