Loading... Please wait...

Add to Wish List

Click the button below to add the CAV-15 MKII AR15 Stripped Lower Blemmish - AR-15 Black to your wish list.

CAV-15 MKII AR15 Stripped Lower Blemmish - AR-15 Black

  • Image 1
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

GWACS Armory Blemish Blow Out.

This item is a blemished item and will have cosmetic imperfections.

We are now taking orders for factory blemished GWACS CAV-15 MKII AR15 Lower receivers.   We have a limited supply in stock ready to ship.   They are the same light weight rugged single piece AR-15 polymer lower receiver but with varying cosmetic flaws and flashing issues. They are 100% functional and covered under our standard limited lifetime warranty.   Obviously as a deeply discounted blemished item we will not accept returns for cosmetic issues.  

Each lower will have minor scratches or flashing cleanup that did not meet the GWACS Armory quality control for aestethics; again, they are 100% functional.

Available in Black only.

Product Videos

GWACS Armory CAV-15 MKII Abuse Test (15:36)
Karl Placed 1st/13 Iron Sight Division, 3rd/44 Overall Russell Placed 2nd/13 Iron Sight Division, 4/44 Overall GWACS Armory http://www.GWACSArmory.com Hahn-Precision http://www.Hahn-Precision.com TSD Combat Systems Magazines http://www.onesourcetactical.com 2 Gun Action Challenge Match: http://twogunaction.squarespace.com/
  • GWACS Armory C...
    Karl Placed 1st/13 Iron Sight Division, 3rd/44 Overall Russell...
  • CAV-15 Dirt/Du...
    I elected to make this video after numerous internet debates. ...

Write your own product review

Product Reviews

Showing reviews 1-10 of 28 | Next

  1. Blemished lowers 5 Star Review

    Posted by on Apr 29th 2018

    I was really stoked when I looked these over. Then I got them home and started pre fitting the parts and got stoked all over. I was a little nervous about what I would receive when I ordered them, almost didn't complete that order. I'me glad I did. From what I can tell so far these lowers are everything They are cracked up to be, and these are supposed to be blemished. Thank You G.W.A.C.'s and a hi 20 to Ian and Karl, without their W W S D series, I would still be on the fence!

  2. What they say , no more no LESS 5 Star Review

    Posted by on Apr 17th 2018

    Great service , was unaware of the product until I saw the In Range video
    like a lot of people did apparently . I waited my turn and got a really cool lower , different but loving it . Did not go all out like the video but put enough in to want another . Faxon 14.5 p&w,ALG hg,Aero slick upper,BCM trigger for now, and JP buffer/spring . No complaints just smiles . This was a blem btw , all good .

  3. For a rifle you intend to use, there are no "blemishes" present 5 Star Review

    Posted by on Apr 16th 2018

    What amounts to a bit of scuffing and scratching is the totality of the blemishes I found. For the difference in price, don't bother buying the perfect one unless you're looking for an immaculate wall hangar or safe queen.

    The only modification I had to do to this lower, other than assembling the parts into it, was to trim a small burr off the front of the magwell. Every other part of the flashing had been well trimmed and smoothed out nicely.

    I'm delighted with the A1 length, and after measuring against my collapsible stocks I found that most of them were set to about the same length. I don't feel restricted by having a fixed stock, and with the weight savings this lower has a pencil barreled A1 upper feeling like a toy rifle!

    I couldn't be happier with my purchase.

  4. Great lower, very light weight and seems very durable 4 Star Review

    Posted by on Apr 13th 2018

    Assembling the lower definitely is different enough to cause a little trouble. Getting the safety detent in was a bit of a challenge and I actually got my first detent stuck in the hole (had to cut the spring in half and use that along with a second safety detent I happened to have from a previous build, luckily it works great!). The roll pin for the buffer retainer is very tight, tried from both sides but had to just hammer it in.

    Quality is top notch. For how light this is you wouldn't expect it, but it's a real solid lower. I'd imagine just as strong if not stronger than a aluminum lower. All being one piece makes it more difficult to assemble but cuts down on fracture points like where the buffer tube would screw into the stock, which should make this very hard to damage.

    Weight on this is amazing. Easily half the weight of my normal lower, if not a bit less. With a long heavy barrel upper the balance is not too good, but with my 16" carbine dissipater upper this thing feels great. Can even do one handed shooting like with a bullpup, it's just so easy to hold up.

    Overall a great product that I will absolutely buy again. It would be nice to have a slightly shorter stock that can be made longer with spacers, would help the women in my life have an easier time shooting it, but the length is in the middle ground where it does wok for everybody.

  5. Better than I expected 4 Star Review

    Posted by on Mar 24th 2018

    Bought the blemished lower thinking I'd probably paint it anyway.
    The blemish on mine was very light scuff marks on the right side of the buttstock, like it slid across the floor of the warehouse. I was curious as to whether I would have to remove any flashing.
    All of the fitment areas were deflashed, and what wasn't done in the other areas isn't visible. I fit it to a completed upper and cycled many times. No problems. The range will tell the rest. Follow up to come.

  6. Far Better Than I Expected 5 Star Review

    Posted by on Mar 24th 2018

    Very little flashing to remove. Perhaps five minutes to clean each one. My first ar and first build. Took about 3 hours to assemble each one with torquing the barrel nut to 30 ft-lbs. They are lighter than other ar's I've handled. Haven't been to the range yet but I predict they will be good tools to have. Thanks to Cave Arms and GWACS Armory for producing a light and strong lower we can depend on.

  7. Very Light With Only Minor Blemishes 5 Star Review

    Posted by on Mar 19th 2018

    I'm very happy with this lower. Only had to do some very minor sanding / cleaning up to get it ready for Cerekote. Looking forward to building with this.

  8. great deal on a blemished Cav-15 lower! 4 Star Review

    Posted by on Jan 25th 2018

    Aside from expected blemished condition, this lower is impressive, seems very sturdy. My only beef is that the cut for the bolt latch is a tad wide, making for a bit of side to side play on the bolt latch. Seems to lock open and release as mormal so far. Live fire testing will tell for sure.

  9. As described 5 Star Review

    Posted by on Dec 14th 2017

    The blemishes on my two lowers seemed to be sanding/buffing marks primarily on the right side of stock area. Some removal of excess plastic. Works 100%. Thanks

  10. nice weight savings, durable feeling. 4 Star Review

    Posted by on Nov 29th 2017

    This review is in conjunction with my previous review. When you receive this you will need to do a little maintenance because of the polymer burrs left befind after the friction welding. There is a GWACS polymer lower assemble video on YouTube that helps with this process and gives you hints and tricks. No sproung noise which is a total bonus and worth the extra money already. After removing all the burrs everything functioned flawlessly. 4/5 stars because of the maintenance required.

Showing reviews 1-10 of 28 | Next

Other Information

Contact Us:

1000 Riverwalk Terrace 1st Floor
Jenks, OK. 74037
Fax your FFL info to: