Loading... Please wait...

Add to Wish List

Click the button below to add the CAV-15 MKII AR15 Fully Populated Lower Blemmish - AR-15 Black to your wish list.

CAV-15 MKII AR15 Fully Populated Lower Blemmish - AR-15 Black

  • Image 1
Calculated at checkout

Sorry but this item is currently unavailable.

Please check back at a later stage.

Product Description

GWACS Armory Blemish Blow Out.

This item is a blemished item and will have cosmetic imperfections.  This is a fully populated AR15 lower meaning it is ready for any AR15 spec upper.  It includes lower parts kit, buffer and buffer spring installed and tested.

We are now taking orders for factory blemished GWACS CAV-15 MKII AR15 Lower receivers.   We have a limited supply in stock ready to ship.   They are the same light weight rugged single piece AR-15 polymer lower receiver but with varying cosmetic flaws and flashing issues. They are 100% functional and covered under our standard limited lifetime warranty.   Obviously as a deeply discounted blemished item we will not accept returns for cosmetic issues.  

Each lower will have minor scratches or flashing cleanup that did not meet the GWACS Armory quality control for aestethics; again, they are 100% functional.

Available in Black only.

Product Videos

GWACS Armory CAV-15 MKII Abuse Test (15:36)
Karl Placed 1st/13 Iron Sight Division, 3rd/44 Overall Russell Placed 2nd/13 Iron Sight Division, 4/44 Overall GWACS Armory http://www.GWACSArmory.com Hahn-Precision http://www.Hahn-Precision.com TSD Combat Systems Magazines http://www.onesourcetactical.com 2 Gun Action Challenge Match: http://twogunaction.squarespace.com/
  • GWACS Armory C...
    Karl Placed 1st/13 Iron Sight Division, 3rd/44 Overall Russell...
  • CAV-15 Dirt/Du...
    I elected to make this video after numerous internet debates. ...

Write your own product review

Product Reviews

  1. I was unable to find a blemish 5 Star Review

    Posted by on Apr 15th 2018

    Comparing it to my friends on blemished Lower I can't see anything wrong with mine there might be a little bit of extra sanding that was done on the bottom of the grip but even that is pretty hard to tell. Takedown pins are pretty darn tight but that's kind of what I've Been Told put it in and out three times and now it's doable with a round of 223 when before it took a small hammer and punch. Absolutely amazing fit up with my uppers that I tried. No wobble even with the rear take down out. Buffer is a little bit sprongier than normal but literally nothing a normal human being whatever notice unless they were specifically hitting and shaking the rifle to see if they could make it make a weird noise.

  2. awsome 5 Star Review

    Posted by on Apr 6th 2018

    I could not find what could have been called a blemish. Good tight fit on my upper

  3. GWAC lower reciever - get two before they are gone. 5 Star Review

    Posted by on Nov 28th 2017

    I haven't fired mine yet (just built the lower for it), but I think this thing is made and probably stronger than your average lower. Plus, I was able to drop nearly a pound with just this receiver. I watched the In-range videos with Ian and Karl and was impressed.

  4. What blemish...? 5 Star Review

    Posted by on Nov 22nd 2017

    I am not sure what is considered the blemish on this lower, possibly an edge not exactly matching up on a seam. Perfect item for a light weight build. While I didn't go for specialized light weight parts, just a lightweight barrel and minimal accessories, the whole rifle comes in at 6lbs and a few ounces. Trigger is very smooth and consistent. Upper is super tight, had to drive in the rear pin. I do wish they had developed some accessories for item. Some sort of different sling attachment for regular or single point slings would be great.

  5. Awesome Product! 5 Star Review

    Posted by on Jul 31st 2017

    After reading and watching good reviews on the CAV-15 lowers I decided to try one out for a Liteweight build. Never used a Poly lower so after researching this was supposedly the strongest. I now see what all the good reviews are about, very lite, solid, pretty good fit/finish and fits great on a couple different uppers. I've put about 500rds through a completed BLEM model and so far zero issues, just follow the manufacturer recommendations and should last a long time. GWACS service was also excellent, they were very helpful and responded quickly to all my questions! Highly recommend both lower and GWACS Armory!

Other Information

Contact Us:

1000 Riverwalk Terrace 1st Floor
Jenks, OK. 74037
Fax your FFL info to: